DIY Fountain Feeders!!! Me and my DB's own design!!! Make it your own!!!

Step 1: Cut a pop bottle off little higher than center, take off lid, and invert.

 Step 2: Cut the bottom of the feed holes starting just above the mouth of the pop bottle. (cut feed hole sizes according to your needs on each side if preferred)

 Step 3: Fill 'er up!!(slowly in case you didn't cut or measure right so you don't spill!)

VIOLA! A .60 fountain feeder!!!(depending on size of bottle 3 liter may be .99)

Don't stop anything from making changes. It could make it better!!! Make it your own!!!